Bulwark PU400

AREA OF APPLICATION:

• Wherever water proofing need with high durability
• Open Terrace
• Any Open Surfaces
• On Metal Roof
• Exterior Side Walls
• Wood

FEATURES:

• Will Provide Tough, Heavy Duty slightly flexible water proof membrane.
• Allows trapped vapor to escape thus preventing peeling and blistering.
• Can be applied in uniform thickness to horizontal and vertical surfaces.
• Develops excellent bond to most building materials.
• BULWARK PU400is not affected by ultraviolet light or by chemicals ranging from mild acids to strong alkalis.
• BULWARK PU400is non-flammable and does not give off toxic gases.
• BULWARK PU400is not harmful to the health of workman.

METHOD OF APPLICATION IN WATER PROOFING :

SURFACE PREPARATION:

• Prior to application of BULWARK PU400 the surface must be prepared as mentioned below to avoid failure and to achieve maximum beneficial properties.
• When placing BULWARK PU400 coating, water should be remov
• The surface shall be cleaned to remove all dust, foreign matters, loose materials or any deposits of contamination which could affect the bonding.

APPLICATION:

• After surface preparation like Removing loose particles and crack Treatment BULWARK PU400 must be applied on the Top of suitable primer Ex.Bulwark Seal cote-3
• Two coats are recommended one more coat can be done to achieve desired thickness.
• First coat should be allowed to air dry for 2-3 hours prior to apply subsequent coat.
• If pond test to be done then can be done only after 48 hrs from the time of application.

PRECAUTIONS:

• BULWARK PU400 system must be applied with temperature above 10⁰ C and below 40⁰ C.
• BULWARK PU400 should not be used with addition of cement.
• BULWARK PU400 is not harm for applicators and users.

STORAGE:

• Store in dry cool place in the temperature range from 5⁰C to 30⁰C in sealed condition.
• Do not allow to freeze. Keep away from direct sunlight.

AVAILABLE COLOUR:

• Transparent , Terra cotta , white

PACKAGING:

• 20Litre, 200litre drum

TECHNICAL DATA:

PARAMETERS	TEST VALUE	METHOD
Appearance	White , Terra cotta , Clear	Visual
Density	1.21 +/- 2	ASTMD412902
Solid Content	64% +/-2	ASTM D2369
Abrasion /Hardness	High	ASTMD4060
Adhesive Strength	7.2 MPA	ASDMD4541
Algae & Fungus Resistant	High ( No Growth)	(ss 345:1998)
Recoating Time, at 27ᴼC, 65% RH, HOURS	01-02 hours	IS 101
Tack free Time	1 hour	Manual /Visual
Full Cure	24 hours	IS 101

COVERING CAPACITY:

• BULWARK PU400 will give following coverage in below mentioned surface
• Coverage will vary based on surface, Application type and workmanship.
• Diluting the final product may give more coverage but definitely affect the quality.

SHELF LIFE & STORAGE:

• SHELF LIFE IS 12 MONTHS FROM THE DATE OF MANUFECTURING.

IMPORTANT NOTE :

All BULWARK CHEMICALS and its products are sold in the market after strict Quality Control in line of ISO 9001 and guaranteed against any manufacturing defect. Although the basic formulation of Company’s products generally remains unchanged, production refinements arising from continuing research and evaluation program may occasionally result in marginal changes in properties. Bulwark aspires to ensure that any recommendation, advice, test data, specification, method statement and other information given in this product datasheet is accurate and best of company’s knowledge. Since, the company (bulwark cool coats and chemicals) has no control over the selection of its product, applicators, application methodology, how and where it is applied, therefore, the company cannot accept any liability directly or indirectly arising from the use of its product. It is important to any customer; user or specifier satisfies him / herself that the product is suitable for the intended purpose including health, safety and environmental aspect. Unless or otherwise agreed in writing, all products of the company are sold strictly pursuant to the terms of our standard conditions of sale which are available upon request. All information and technical assistance is given without warranty or guarantee and is subject to change without notice. All customers, users, specifers should ensure that they examine the suitability of the product with company’s latest product data sheet.

CUSTOMER CARE : 1800 88 921 88