BULWARK WALL GUARD is single component, Premium Acrylic Waterproof coating which consists of specially developed polymers and properly selected components.BULWARK WALL GUARD is not a usual exterior paint unlike other exterior Paint BULWARK WALL GUARD made by using Premium Acrylic Resin and Modified Kaolin which ensure long lasting performance. It cures by natural air, sunlight and gives elastomeric waterproof membrane BULWARK WALL GUARD is elastomeric in nature and has good resistance to weather and sunlight.
BULWARK WALL GUARD has excellent protection against UV rays and reduces the temperature of 8°C –11°C It posses breathing properties, water resistance, crack bridging properties & UV resistance.
AREA OF APPLICATION:
- Exterior Wall
- Residential Open Terrace
- Any vertical surface
FEATURES:
- Will Provide Flexible waterproof Membrane.
- Allows trapped vapor to escape thus preventing peeling and blistering.
- Can be applied in uniform thickness to horizontal and vertical surfaces.
- Develops excellent bond to most building materials.
- BULWARK WALL GUARD is not affected by ultraviolet light or or by mild chemicals.
- BULWARK WALL GUARD is non-flammable and does not give off toxic gases.
- BULWARK WALL GUARD is not harmful to the health of workman.
METHOD OF APPLICATION IN WATER PROOFING :
SURFACE PREPARATION:
- Prior to application of BULWARK WALLGUARD the surface must be prepared as mentioned below to avoid failure and to achieve maximum beneficial properties.
- When placing BULWARK WALLGUARD coating, water should be removed
- The surface shall be cleaned to remove all dust, foreign matters, loose materials or any deposits of contamination which could affect the bonding.
APPLICATION:
- After surface preparation like Removing loose particles and crack Treatment
- BULWARK WALL GUARD must be diluted with 1:1 Ratio of water and can apply as a Primer.
- Two coats are recommended along with one coat of primer.
- First coat should be allowed to air dry for 2-3 hours prior to apply subsequent coat.
PRECAUTIONS:
- BULWARK WALLGUARD WALLGUARD system must be applied with temperature above 10⁰ C and below 40⁰ C.
- BULWARK WALLGUARD should not be used with addition of cement.
- BULWARK WALLGUARD is not harm for applicators and users.
STORAGE:
- Store in dry cool place in the temperature range from 5⁰C to 30⁰C in sealed condition.
- Do not allow to freeze. Keep away from direct sunlight.
AVAILABLE COLOUR:
- White Base and 200 colors.
PACKAGING:
- 10kg and 20kg
TECHNICAL DATA:
| PARAMETERS | TEST VALUE | METHOD |
|---|---|---|
| Appearance | White and 200 Colours Available | Visual |
| Elongation | 130% | ASTMD 412902 |
| Crack Bridging | 0.5mm | ASTM C 836:1995 |
| Solid Content | 56+-2 | IS STD TEST |
| Abrasion /Hardness | High | ASTMD240:2002 |
| Adhesive Strength | High | IS 516 |
| Algae & Fungus Resistant | High ( No Growth) | (ss 345:1998) |
| Recoating Time, at 27ᴼC, 65% RH, HOURS | 03-04 hours | IS 101 |
| Full Cure | 1 DAYS | IS 101 |
| Consistency | 10% Potable water | IS 101 |
| Volatile organic Matter (VOC) %, (w/w) | <0.6 % | IS 101 |
COVERING CAPACITY:
- BULLWARK WALLGUARD will give following coverage in below mentioned surface
- Coverage will vary based on surface, Application type and workmanship.
- Adding more water may give more coverage but definitely affect the quality
- To achieve desired thickness along with good coverage better use appropriate level of water i.e. Not more than 10% of the BULLWARK WALLGUARD volume.
| SURFACE | COVERAGE |
|---|---|
| Outer Wall | 450-600S.ft for Two Coats |
| On Primer Applied Wall | 550-600S.ft for Two Coats |
SHELF LIFE & STORAGE:
- SHELF LIFE IS 12 MONTHS FROM THE DATE OF MANUFACTURING.
IMPORTANT NOTE :
All BULWARK CHEMICALS and its products are sold in the market after strict Quality Control in line of ISO 9001 and guaranteed against any manufacturing defect. Although the basic formulation of Company’s products generally remains unchanged, production refinements arising from continuing research and evaluation program may occasionally result in marginal changes in properties. Bulwark aspires to ensure that any recommendation, advice, test data, specification, method statement and other information given in this product datasheet is accurate and best of company’s knowledge. Since, the company (bulwark cool coats and chemicals) has no control over the selection of its product, applicators, application methodology, how and where it is applied, therefore, the company cannot accept any liability directly or indirectly arising from the use of its product. It is important to any customer; user or specifier satisfies him / herself that the product is suitable for the intended purpose including health, safety and environmental aspect. Unless or otherwise agreed in writing, all products of the company are sold strictly pursuant to the terms of our standard conditions of sale which are available upon request. All information and technical assistance is given without warranty or guarantee and is subject to change without notice. All customers, users, specifers should ensure that they examine the suitability of the product with company’s latest product data sheet.
CUSTOMER CARE : 1800 88 921 88